Nexus S

Nexus is a modular system for shower and toilet cubicles designed for locker rooms, sports facilities and high-traffic contract environments. It combines compact HPL surfaces, protective details and purpose-designed hardware to ensure order, durability and ease of upkeep, even with water, steam and cleaning agents.

Nexus is built around the idea of discreet robustness: thick compact HPL panels raised off the floor on recessed stainless-steel feet, improving resistance to moisture and making cleaning and day-to-day management easier. The fixing system uses anodised aluminium wall profiles with an “anti-dirt” shaped geometry and a top connecting crossbar that is not visible from the outside, resulting in a clean, continuous appearance.
Doors are fitted with adjustable internal-spring hinges that provide automatic return to the closed position, keeping cubicles aligned and orderly without complex mechanisms. Protective finishing and door-stop elements complete the system, enhancing safety, durability and the overall perception of solidity.

Nexus S / Shower cubicle

Nexus S is the version dedicated to shower areas and can integrate, on request, a robe hook on the outer side of the door, adding a useful function without altering the clean front.

Technical features

• Compact HPL (High Pressure Laminate) panels, 14 mm thick, Bs1-d0 certified, resistant to water, steam and chemical agents
• Panels raised off the floor on recessed stainless-steel feet supporting the partition
• Anodised aluminium wall-fixing profiles with “anti-dirt” shaped section
• Top connecting crossbar, not visible from the outside
• Doors with adjustable internal-spring hinges for automatic return to the closed position
• Finishes: soft PVC anti-injury extrusion + rigid/soft co-extrusion for door stop
• Stainless-steel knob
• Optional robe hook

Nexus S 6

Data Sheet

Nexus S

Nexus S FAQ

Useful information for architects, interior designers and specifiers

What makes the Nexus S system distinctive?

Nexus S is a modular system for shower cubicles with doors and partitions in compact HPL laminate, designed for changing rooms, gyms, SPAs, hotels and wellness environments.

Which materials characterise Nexus S?

The doors and partitions are made of 14 mm thick compact HPL laminate, classified B-s1,d0 according to EN 13501-1 for reaction to fire. The material is suitable for use in environments subject to water, steam and chemical agents.

Which configurations are available?

Nexus S includes shower cubicles, partitions and end panels in different compositions and dimensions. Configurations, available elements and measurements must be checked in the + Nexus S datasheet.

How are the panels supported?

The panels are raised from the floor by stainless steel feet, set back inside the cubicle. Wall fixing is carried out with anodised aluminium profiles and the upper connection is made by means of a crossbar that is not visible from the outside.

Which features support everyday use?

The doors are equipped with hinges with adjustable internal springs, which support automatic return to the closed position. The system also includes a stainless steel knob and lock with free/occupied indicator and emergency opening from the outside.

Which details improve safety and finish?

The edges are completed with a soft safety PVC extrusion and a rigid/soft gasket for stopping the door. These elements protect contact points and make the cubicle closure more orderly.

Is a hook for a bathrobe available?

Yes. A bathrobe hook can be provided as an accessory, according to the selected configuration.

Which conditions must be checked before installation?

Before designing the cubicle, the room height, the presence of adequate wall reinforcements, the possibility of fixing the system to the floor and the absence of elements that obstruct the anchoring area must all be checked.

What is the minimum room height?

Nexus S cannot be installed in rooms with a height of less than 240 cm.

How is the system fixed to the floor?

Fixing the feet requires drilling the floor to a minimum depth of 40 mm. If this anchoring cannot be carried out, the installation cannot be considered safe.

Can Nexus S be installed where a floor-level shower tray is present?

The presence of a shower tray installed at floor level must be checked before design, as it may reduce the area required for fixing the system.

Can Nexus S be made or adapted to measure?

The standard configurations are indicated in the datasheet. Any adaptations or special solutions require technical verification, a dedicated quotation and specific lead times.

Is project support available?

Yes. Fit Interiors can support designers in checking the configuration, room conditions, fixings and compatibility of the solution with the overall project.